Brixton ™ Ceramic Floor & Wall
This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.
Indicates the use of post-consumer recycled material content in a product.
Indicates the use of pre-consumer recycled material content in a product.
Roll over to zoom product
Photo features Brixton Sand 9 x 12, 6 x 6 wall field tile and 9 x 12 decorative accent on shower wall.
Floor & Wall Field Tile
Floor/Wall Decorative Accent
Backsplash Design Ideas
• WARM CLASSIC STYLE
-- Rustic stone design that gives space an old-world look
-- Offered in three warm neutral colors
• NATURAL COMPLEMENTS
-- Coordinating floor and wall tile available
-- Finish the look with complementing decorative border and trim
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
|Floor||> 0.42||< 7.0%||>250 lbs.||8.0||Resistant||4|
|Wall||N/A||< 20.0%||120 - 230 lbs.||4.0 - 6.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60|
|Covered Exterior||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
* Floor tile and 6 x 6 wall tile only
^ 6 x 6 wall tile only
Suitable for exterior applications in non-freezing climates only, when proper installation methods are followed.
|18 x 18 Floor Tile*||
(17 3/4" x 17 3/4")
(45.20 cm x 45.20 cm)
Pieces Per Carton: 8
|12 x 12 Floor Tile*||
(11 13/16" x 11 13/16")
(30.00 cm x 30.00 cm)
Pieces Per Carton: 11
|9 x 12 Wall Field Tile||
(8 15/16" x 11 15/16")
(22.70 cm x 30.30 cm)
Pieces Per Carton: 15
|6 x 6 Wall Field Tile||
(6" x 6")
(15.20 cm x 15.20 cm)
Pieces Per Carton: 50
|3 x 12 Universal Decorative Border||
(3" x 11 3/4")
(7.60 cm x 29.90 cm)
Pieces Per Carton: 10
Special consideration needs to be given when installing tiles 20" and larger. Please click here for more information.
* This product is manufactured regionally. Slight variances in size and shading may occur between regions. Please contact your sales representative to verify carton square footage. As with all tile projects, be sure to purchase sufficient quantities with your initial order.
|Bullnose||S-43C9||3 x 12|
|Wall Bullnose (6" side)||S-4269||2 x 6|
|Bullnose (9" side)||S-4309||3 x 9|
|Bullnose||S-4669||6 x 6|
|Wall Bullnose Corner||SN-4269||2 x 2|
|Bullnose Corner||SN-4309||3 x 3|
|Bullnose Corner||SCRL-4669||6 x 6|
|Quarter Round Corner||UC-106||1 x 1|
|Quarter Round||A-106||1 x 6|
|Counter Rail||26CRWL||2 x 6|
|Bullnose||A-4200||2 x 6|
|Bullnose Corner||AN-4200||2 x 2|
|Counter Corner||22CRCN||2 x 2|
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.
Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.