Permatones™ Mosaic Tile

Green Squared
Green Squared

Daltile is proud to champion innovation within the industry, as one of the first to support Green Squared, a new standard for sustainable projects. Most of our products have already achieved Green Squared Certification and meet the industry’s toughest green standard to date.

Product Image

Roll over to zoom product

Arctic White (1) 6570

Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX

These small-unit mosaic tiles enhance any design with the brillant colors of the rainbow. And since they have a durable, matte finish Permatones will resist fading and staining to keep their vivid color


  • Mounting: Standard mounting method is on 1' x 2' dot-mounted sheets, which provides excellent bonding surface for faster installation.

  • Use of a latex modified thin-set is recommended for installation. Not for use on ramps.

  • *Available in Made-to-Order Only.

Tile Thickness:
Relative Pricing:
Grout Joint
1/8" Approximately.
Shade Variation:
Low (V1)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    < 0.42 <3.0%  >300 lbs. 6.0-7.5 Resistance 4 - Commercial

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website:

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section, available at
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
  Residential Light
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered) *    
Pool Decking          
Pool Linings
Floors Walls Countertops Exterior Patios Exterior Pool Decks


  • *Office building bathroom floors & hotel baths only. Not for use on shower stall floors.

  • Permatones series suitable only for residental bathroom floors not subject to outside foot traffic. Not for use on shower floors.

  • Suitable for exterior walls in non-freezing climates when proper installation methods are followed.

  • Office building restroom floors and hotel baths only. Not for use on shower stall floors. Check all building codes for COF compliance prior to installation.

Size     Shape
2 x 2 Nominal Field Tile
(1 15/16" x 1 15/16")
(4.9 cm x 4.9 cm)
Pieces Per Carton: 12
SQFT: 24.00
  2" x 2" Nominal Field Tile
Description   Shape Number Size Shape
Bullnose   S-886 2 x 2 Bullnose S-886 - 2" x 2"


  • Built up Base is not available in Group 2 colors.

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.