Permatones ™ Mosaic Tile

Product Image

Roll over to zoom product

Arctic White (1) 6570

Pre-Consumer: 23.8%
Post-Consumer: 4.8%
Manufacturing Plant: Monterrey, MX

These small-unit mosaic tiles enhance any design with the brillant colors of the rainbow. And since they have a durable, matte finish Permatones will resist fading and staining to keep their vivid color


  • Mounting: Standard mounting method is on 1' x 2' dot-mounted sheets, which provides excellent bonding surface for faster installation.

  • Use of a latex modified thin-set is recommended for installation. Not for use on ramps.

  • *Available in Made-to-Order Only.

Tile Thickness:
Relative Pricing:
Grout Joint
1/8" Approximately.
Shade Variation:
Low (V1)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    < 0.42 <3.0%  >300 lbs. 6.0-7.5 Resistance 4 - Commercial

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTestâ„¢, click here or visit the Tile Council of North America's website:

Manufacturer Advisory:

  • These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section, available at
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior n/a   *
Wet & Level - Interior ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Covered Exterior ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Pool Linings  


  • Mosaics suitable for exterior applications in non-freezing climates only when proper installation methods are followed.

  • Office building restroom floors and hotel baths only. Not for use on shower stall floors. Check all building codes for COF compliance prior to installation.

  • *Suitable for residential and light commercial floor use (such as hotel bath) not subject to outside foot traffic.

Size     Shape
2 x 2 Nominal Field Tile
(1 15/16" x 1 15/16")
(4.9 cm x 4.9 cm)
Pieces Per Carton: 12
SQFT: 24.00
  2" x 2" Nominal Field Tile