Metal Fusion ™ ColorBody™ Porcelain

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Bronzed Copper 8 x 24 and Stainless Steel 24 x 24 field tile on the floor.



 

Notes:

  • Due to the metallic granules used on the surface of the tile, it is extremely important to ensure that the tile does not come in contact with any abrasive agents or chemicals.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.

  • Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions.

  • Manufactured in accordance with ANSI A137.1 standards.

Tile Thickness:
3/8"
Relative Pricing:
High
Minimum
Grout Joint
Recommendation:
1/16", (1/8" when used in a pattern)
Shade Variation:
High (V3)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    < 0.42 <0.5%  >450lbs 6 N/A 3 - Heavy Residential or Light Commercial

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)    
Walls/Backsplashes
Countertops
Pool Decking          
Pool Linings          
Pool Tank/Submerged          
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E

Notes:

  • Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

  • Not for use on ramps.

Size     Shape
8 x 24 Light
Polished Field Tile

(7 15/16" x 24.0")
(20.3 cm x 61.0 cm)
Pieces Per Carton: 8
SQFT: 10.66
 
  8" x 24" Light<br /> Polished Field Tile
16 x 16 Light
Polished Field Tile

(15 15/16" x 15 15/16")
(40.5 cm x 40.5 cm)
Pieces Per Carton: 8
SQFT: 14.10
 
  16" x 16" Light<br /> Polished Field Tile
16 x 24 Light
Polished Field Tile

(15 15/16" x 24.0")
(40.5 cm x 61.0 cm)
Pieces Per Carton: 4
SQFT: 10.66
 
  16" x 24" Light<br /> Polished Field Tile
24 x 24 Light
Polished Field Tile

(24.0" x 24.0")
(61.0 cm x 61.0 cm)
Pieces Per Carton: 4
SQFT: 16.04
 
  24" x 24" Light<br /> Polished Field Tile
Description   Shape Number Size Shape
Bullnose   S-43D9 3 x 16 Bullnose S-43D9 - 3" x 16"

Notes:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.