Modern Dimensions ™ Wall & Counter Glazed
Indicates the use of post-consumer recycled material content in a product.
Indicates the use of pre-consumer recycled material content in a product.
Roll over to zoom product
Photo features Modern Dimensions™ Matte Arctic White 4 x 12 on the shower wall and seat and Retro Rounds™ Bold White Gloss on the shower floor.
Made to Order Colors - Matte
Made to Order Colors - Semi-gloss
Matte Field Tile
Semi-gloss Field Tile
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Special care should be taken when grouting with dark pigmented colors.
Select Daltile products such as 1" Maracas Glass or 1" and 2" Glass Reflections may be purchased seperately for insertion in the Light Rail.
Numbers in ( ) indicate price groups. No. (1) is the least expensive.
Modern Dimension mosaics were developed to "coordinate" with Modern Dimension wall tile but are not an exact match. They are made in different factories - glazed wall is on ceramic body while the mosaics are porcelain. No trim is available for MD mosaics.
|Mosaic||< 0.42||<20%||120-230 lbs||4.0-6.5||Resistant||1|
|Wall||.00||< 20%||120-230 lbs.||4.0-6.5||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
- These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 22.214.171.124.10, available at www.tileusa.com.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Target DCOF wet||Suitable|
|Dry & Level - Interior Floor||n/a|
|Wet & Level - Interior Floor||≥ 0.42|
|Shower Floors (Residential or Light Commercial)||≥ 0.42|
|Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Application requirements may vary for decorative accents. Not for use on ramps.
Suitable for exterior walls in freezing (Mosaics only) and non-freezing climates when proper installation methods are followed.
* Matte finish mosaics only. Darker colors may show scratches.
^ Mosaic tile only
|2 x 4 Straight-Joint Mosaic||
(11 7/8" x 11 7/8" Sheet)
(30.2 cm x 30.2 cm Sheet)
Pieces Per Carton: 10
|2 1/8 x 8 1/2 Eclipse||
(2 1/8" x 8 9/16")
(10.79 cm x 21.76 cm)
Pieces Per Carton: 80
|2 1/8 x 8 1/2 Field Tile||
(2 5/32" x 8 9/16")
(5.48 cm x 21.75 cm)
Pieces Per Carton: 80
|4 1/4 x 8 1/2 Field Tile||
(4 1/4" x 8 9/16")
(10.79 cm x 21.74 cm)
Pieces Per Carton: 42
|4 1/4 x 12 3/4 Field Tile||
(4 1/4" x 12 7/8")
(10.79 cm x 32.71 cm)
Pieces Per Carton: 28
|4 1/4 x 12 3/4 Wave Accent||
(4 1/4" x 12 3/4")
(10.8 cm x 32.4 cm)
Pieces Per Carton: 28
|Bullnose Corner||SCRL-4449||4 1/4 x 4 1/4|
|Quarter Round||A-108||1 x 8 1/2|
|Wall Bullnose (4" side)||S-4849||4 1/4 x 8 1/2|
|Bullnose||S-4489||4 1/4 x 8 1/2|
|Bullnose (12 3/4 side)||S-44C9||4 1/4 x 12 3/4|
|Bullnose (4 1/4 side)||S-4C49||4 1/4 x 12 3/4|
|Wall Bullnose Corner (Left or Right)||SCR-L4489||4 1/4 x 8 1/2|
|Bullnose Corner||SCR-L44C9||4 1/4 x 12 3/4|
|Flat Top Cove||A-34C1||4 1/4 x 12 3/4|
|Flat Top Cove||A-3481||4 1/4 x 8 1/2|
|Bullnose||S-4289||2 1/8 x 8 1/2|
|Bullnose Corner||SN-4289||2 1/8 x 2 1/8|
Cove Base is only available in 0790/0190 & K775/K175
**A3401 Cove Base & Chair Rail is only available in Arctic White and Biscuit
Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.