Veranda Solids ™ ColorBody™ Porcelain

Linear Options
Linear Options

Products can be custom cut into linear and rectangular sizes for unique designs, with straight or beveled edges in a variety of rectangular shapes. Click here for more information.

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Exterior Product
Exterior Product

Indicates products suitable for exterior applications.

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Featured in EXTREME MAKEOVER: HOME EDITION. Photo features Veranda Solids in Sand 20 x 20 and Rawhide 6-1/2 x 6-1/2 and 6-1/2 x 20 field tiles.



Field Tile

Decorative Accents

Backsplash Design Ideas

 
From a sense of casualness to sleek sophistication, Veranda's beauty lies in its versatility. This stylish tile is comfortable and understated and makes itself right at home in a wide range of environments. Paired with distinctive accents and trim, it's available in a variety of sizes, which makes for fresh pattern options. Rich, progressive colors come alive in a look that is evocative of smooth, stained concrete. With its clean, graceful artistry, Veranda suits a variety of tastes and complements today's eclectic lifestyles.

Notes:

  • Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.

  • Use of a latex modified thin-set is recommended when installing porcelain tile. Not for use on ramps.

  • (1) and (2) indicate Price Groups, (1) being the least expensive.

Tile Thickness:
3/8"
Relative Pricing:
Medium - High
Minimum
Grout Joint
Recommendation:
1/8” (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)
Shade Variation:
High (V3)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    > 0.42 <0.5%  >500 lbs. 8.5 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes
Countertops
Pool Decking          
Pool Linings
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E

Notes:

  • Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

Size     Shape
3 x 3 Mosaic
(12 7/8" x 12 7/8" sheet)
(32.8 cm x 32.8 cm sheet)
Pieces Per Carton: 5
SQFT: 5.71
Mesh-mounted on 13 x 13 sheet
 
  3" x 3" Mosaic
3 x 3 Decorative
Corner

(3" x 3")
(7.5 cm x 7.5 cm)
Pieces Per Carton: 5
 
  3" x 3" Decorative<br /> Corner
3 x 20 Decorative
Border

(3" x 19 3/4")
(7.5 cm x 50.0 cm)
Pieces Per Carton: 6
 
  3" x 20" Decorative<br /> Border
6 1/2 x 6 1/2 Field Tile
(6 3/8" x 6 3/8")
(16.2 cm x 16.2 cm)
Pieces Per Carton: 32
SQFT: 9.16
 
  6 1/2" x 6 1/2" Field Tile
6 1/2 x 20 Field Tile
(6 3/8" x 19 1/2")
(16.2 cm x 49.2 cm)
Pieces Per Carton: 12
SQFT: 10.32
 
  6 1/2" x 20" Field Tile
13 x 13 Field Tile
(12 7/8" x 12 7/8")
(32.8 cm x 32.8 cm)
Pieces Per Carton: 10
SQFT: 11.44
 
  13" x 13" Field Tile
13 x 20 Field Tile
(12 7/8" x 19 1/2")
(32.8 cm x 49.2 cm)
Pieces Per Carton: 6
SQFT: 10.32
 
  13" x 20" Field Tile
20 x 20 Field Tile
(19 1/2" x 19 1/2")
(49.2 cm x 49.2 cm)
Pieces Per Carton: 6
SQFT: 15.51
 
  20" x 20" Field Tile
 Linear Options Size     Shape
3 1/4 x 20 Field Tile
(3 1/4" x 19 1/2")
(7.96 cm x 49.2 cm)
Pieces: 10
SQFT: 4.16
  3 1/4" x 20" Field Tile
6-1/2 x 13 Field Tile
(6 3/8" x 12 7/8")
(16.2 cm x 32.8 cm)
Pieces: 25
SQFT: 14.3
  6-1/2" x 13" Field Tile
Description   Shape Number Size Shape
Bullnose Made in the USA   S-44K9M 4 x 20 Bullnose S-44K9M - 4" x 20"
Cove Base   S-36E9T 6 x 13 Cove Base S-36E9T - 6" x 13"
Outside Cove Corner   SC-36E9T 1 x 6 Outside Cove Corner SC-36E9T - 1" x 6"

Notes:

  • Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.