Brancacci ™ Ceramic Floor & Wall

Post-Consumer
Post-Consumer

Indicates the use of post-consumer recycled material content in a product.

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Green Squared
Green Squared

Daltile is proud to champion innovation within the industry, as one of the first to support Green Squared, a new standard for sustainable projects. Most of our products have already achieved Green Squared Certification and meet the industry’s toughest green standard to date.

Product Image

Roll over to zoom product

Photo Features Windrift Beige 12 x 12 field tile bordered by 3 x 12 floor/wall Universal Decorative tile.



 
The splendor, harmony and elegance of Roman architecture come to life with Brancacci. Equally at home on both floors and walls, this breathtaking glazed tile captures the essence of classic Italian craftsmanship that has withstood the test of time.
Tile Thickness:
5/16"
Relative Pricing:
Medium
Minimum
Grout Joint
Recommendation:
3/16" (floor), 1/16" (wall), 1/8" (mosaic)
Shade Variation:
High (V3)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Floor  > 0.42 <3.0%  =250 lbs 8.0 Resistant IV
  Wall  < 0.42 <20%  120-250 lbs 4.0-6.5 Resistant IV
  Mosaics  > 0.42 < 3.0%  > 250 lbs. 8.0 Resistant IV

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes
Countertops
Pool Decking          
Pool Linings
Pool Tank/Submerged          
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E

Notes:

  • Suitable for non-freezing climates when proper installation methods are followed.
    Wall Accent pieces suitable for for use on wall/backsplashes only.
    Mosaic suitable for pool linings in non-freezing climates only.

  • Wall field tile also suitable for residential bathroom floors only not subject to outside foot traffic, excluding accent pieces.

  • Wall accent pieces suitable for use on wall/backsplashes only.

  • Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed. Not for use on ramps.

  • Floor tile suitable for exterior floors and walls in non-freezing climates when proper installation methods are followed.

Size     Shape
2 x 2 Mosaic
(Sheet 11 15/16" x 23 15/16")
(Sheet 30.2 cm x 60.9 cm)
Pieces Per Carton: 12
SQFT: 24.00
(Dot-mounted on a 1' x 2' sheet)
 
  2" x 2" Mosaic
6 x 6 Wall Field
Tile

(6" x 6")
(15.2 cm x 15.2 cm)
Pieces Per Carton: 50
SQFT: 12.50
 
  6" x 6" Wall Field<br /> Tile
2 x 12 Arched
Floral Lisetto

(1 15/16" x 11 15/16")
(4.9 cm x 30.3 cm)
Pieces Per Carton: 12
 
  2" x 12" Arched<br /> Floral Lisetto
2 x 12 Resin
Chair Rail

(1 15/16" x 11 15/16")
(4.9 cm x 30.3 cm)
Pieces Per Carton: 12
 
  2" x 12" Resin<br /> Chair Rail
3 x 12 Universal
Accent

(2 7/8" x 11 13/16")
(7.3 cm x 30.2 cm)
Pieces Per Carton: 10
 
  3" x 12" Universal<br /> Accent
9 x 12 Wall
Field Tile

(8 15/16" x 11 15/16")
(22.7 cm x 30.3 cm)
Pieces Per Carton: 15
SQFT: 11.25
 
  9" x 12" Wall<br /> Field Tile
12 x 12 Floor
Field Tile

(11 13/16" x 11 13/16" 13/16")
(30.0 cm X 30.0 cm)
Pieces Per Carton: 11
SQFT: 11.00
 
  12" x 12" Floor<br /> Field Tile
12 x 18 Wall
Field Tile

(11 13/16" x 17 7/8")
(30.0 cm x 45.4 cm)
Pieces Per Carton: 11
SQFT: 16.42
 
  12" x 18" Wall<br /> Field Tile
18 x 18 Floor
Field Tile

(17 7/8" x 17 7/8")
(45.4 cm x 45.4 cm)
Pieces Per Carton: 18
SQFT: 18.00
 
  18" x 18" Floor<br /> Field Tile
Description   Shape Number Size Shape
Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"
Bullnose   S-4309 3 x 9 Bullnose S-4309 - 3" x 9"
Bullnose   S-4669 6 x 6 Bullnose S-4669 - 6" x 6"
Bullnose Corner   SCRL-4669 6 x 6 Bullnose Corner SCRL-4669 - 6" x 6"
Bullnose Corner   SN-4309 3 x 3 Bullnose Corner SN-4309 - 3" x 3"
Quarter Round Corner   UC-106 1 x 1 Quarter Round Corner UC-106 - 1" x 1"
Quarter Round   A-106 1 x 6 Quarter Round A-106 - 1" x 6"
Counter Rail   26CRWL 2 x 6 Counter Rail 26CRWL - 2" x 6"
Counter Corner   22CRCN 2 x 2 Counter Corner 22CRCN - 2" x 2"

Notes:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.