Monticito™ ColorBody™ Porcelain
Products can be custom cut into linear and rectangular sizes for unique designs, with straight or beveled edges in a variety of rectangular shapes. Click here for more information.
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Monticito in Brune 12 x 12. Daltile #224 Smoke grout. Diamond pattern shown.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
Use of a latex modified thin-set is recommended for installation. Not for use on ramps.
|Test Results||> 0.42||<0.5%||>450 lbs||7||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
|Floors/Patios (Covered & Uncovered)|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
Suitable for freezing and non-freezing climates when proper installation methods are followed.
|12 x 12 Field Tile||
(11 5/8 x 11 5/8)
(29.6 cm x 29.6 cm)
Pieces Per Carton: 11
|18 x 18 Field Tile||
(17 5/8 x 17 5/8)
(44.8 cm x 44.8 cm)
Pieces Per Carton: 5
|Linear Options Size||Shape|
|6 x 18||
(6" x 17 5/8")
(15.25 cm x 44.8 cm)
|Bullnose||S-44C9||4 x 12|
|Cove Base||S-36C9T||6 x 12|
|Outside Cove Corner||SC-36C9T||1 x 6|
Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.