Daltile

Octagon & Dot™

Mosaic Tile

Pre-Consumer

Field Tile

MATTE WHITE WITH 01 WHITE MATTE DOT 6501
Field Tile
Pre-Consumer: 23.8%
Post-Consumer: 4.8%
Manufacturing Plant: Monterrey, MX
MATTE WHITE WITH 44 GRAY GLOSS DOT 6501
Field Tile
Pre-Consumer: 23.8%
Post-Consumer: 4.8%
Manufacturing Plant: Monterrey, MX
MATTE WHITE WITH 21 BLACK GLOSS DOT 6501
Field Tile
Pre-Consumer: 23.8%
Post-Consumer: 4.8%
Manufacturing Plant: Monterrey, MX
 

Description

Octagon & Dot is a fashionable remake of a classic look, each of its octagon-shaped tiles is accented by four smaller tiles available in a variety of colors. This basic patterning creates an overall effect like that of tiling found in fine homes of yesteryear. Ideal for remodeling projects. Octagon & Dot comes in pre-formatted sheets that make installation easy. It is perfect for kitchens, baths, and other areas around the home.

Product Information

Tile Thickness:
1/4"
Minimum
Grout Joint
Recommendation:
1/16"
Shade Variation:
Low (V1)

Technical Data

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    < 0.42 <3%  >250 lbs 6 N/A 4 - Commercial

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior n/a   *
Wet & Level - Interior ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Covered Exterior ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  

Notes:

  • *Suitable for residential and light commercial floor use (such as hotel bath) not subject to outside foot traffic.

Downloads/Links

Tile Size

Size     Shape
2 x 2 Octagon
with 1 x 1 Dot

(Dot-mounted)
 
  2" x 2" Octagon <br />with 1" x 1" Dot