Daltile

Nature Flecks

One Quartz Surfaces

Slab

CINDER STORM NQ28
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
MAR BLANC NQ32
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
MARBELESQUE NQ74
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
LUMINESCE NQ75
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
HONEYED MAHOGANY NQ94
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
MOLTEN GREY NQ95
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
SNOW LEOPARD NQ96
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
WHITE SAND NQ97
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
CALACATTA NQ06
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
WHITE STATUARY NQ12
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
CARRARA GIOIA NQ63
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
ASH GREY NQ69
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
DIAMOND CHIP NQ54
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
CAMEO PEARL NQ08
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
MEADOW BRUSH NQ29
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
ALMONDINE NQ36
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
GREY NIMBUS NQ57
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
CIRRUS SMOKE NQ50
Slab
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:
 

Description

This collection offers beautiful nature inspired looks, with the same low-maintenance benefits and durability One Quartz is known for.

Notes:

  • One Quartz Surfaces products are nonporous, reducing the potential for bacteria growth, resist common food stains and are stronger than natural granite.

  • One Quartz Surfaces products are virtually maintenance free.

  • ONE Quartz Surfaces products are, on average, 93% natural quartz stone providing consistent color and visual movement for a wide range of design possibilities. Actual quartz percentages vary by color. Test results reflecting the specific content per color are available upon request.

  • One Quartz Surfaces products have a durable, scratch-resistant surface.

  • One Quartz Surfaces products are heat and scorch-resistant under normal cooking conditions (use of a trivet is recommended for longer or extreme heat exposure).

Product Information

Tile Thickness:
1/2" (Tile);
3/4" & 1 1/4" (Slab)
Minimum
Grout Joint
Recommendation:
1/16" (Tile only)
Shade Variation:
Medium (V2)

Technical Data

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Polished  < .42 .03 - .01%  1207 lbs. N/A Resistant 60+
  Semi-Polished, Honed, Leather  < .42 .03 - .01%  1207 lbs. N/A Resistant 60+

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)      
Walls/Backsplashes    
Countertops    
Pool Decking          
Pool Linings          
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C

Downloads/Links

Tile Size

Size     Shape
12 x 12 Field Tile
(11.81" x 11.81" x 0.5")
(30.0 cm x 30.0 cm x 1.2 cm)
SQFT: 6.79
Special Order Only
 
  12" x 12" Field Tile
12 x 24 Field Tile
(11.81" x 23.62" x 0.5")
(30.0 cm x 60.0 cm x 1.2 cm)
SQFT: 7.76
Special Order Only
 
  12" x 24" Field Tile
18 x 18 Field Tile
(17.91" x 17.91" x 0.5")
(45.5 cm x 45.5 cm x 1.2 cm)
SQFT: 8.92
Special Order Only
 
  18" x 18" Field Tile
24 x 24 Field Tile
(23.62" x 23.62" x 0.5")
(60.0 cm x 60.0 cm x 1.2 cm)
SQFT: 11.64
Special Order Only
 
  24" x 24" Field Tile