Daltile

EC1™

ColorBody™ Porcelain

Tru-Edge Exterior Product Pre-Consumer Certified Porcelain

Field Tile

FARRINGDON J100
Field Tile
Pre-Consumer: 19.0%
Post-Consumer: 0.0%
Origin: Italy
BANK J101
Field Tile
Pre-Consumer: 23.0%
Post-Consumer: 0.0%
Origin: Italy
HOLBORN J102
Field Tile
Pre-Consumer: 26.0%
Post-Consumer: 0.0%
Origin: Italy
DOCKS J103
Field Tile
Pre-Consumer: 28.0%
Post-Consumer: 0.0%
Origin: Italy
CITY J104
Field Tile
Pre-Consumer: 27.0%
Post-Consumer: 0.0%
Origin: Italy
BARBICAN J105
Field Tile
Pre-Consumer: 28.0%
Post-Consumer: 0.0%
Origin: Italy

Decorative Accents

FARRINGDON J100
Decorative Accents
Pre-Consumer: 19.0%
Post-Consumer: 0.0%
Origin: Italy
BANK J101
Decorative Accents
Pre-Consumer: 23.0%
Post-Consumer: 0.0%
Origin: Italy
HOLBORN J102
Decorative Accents
Pre-Consumer: 26.0%
Post-Consumer: 0.0%
Origin: Italy
DOCKS J103
Decorative Accents
Pre-Consumer: 28.0%
Post-Consumer: 0.0%
Origin: Italy
CITY J104
Decorative Accents
Pre-Consumer: 27.0%
Post-Consumer: 0.0%
Origin: Italy
BARBICAN J105
Decorative Accents
Pre-Consumer: 28.0%
Post-Consumer: 0.0%
Origin: Italy

Available Surfaces

POLISHED Shown in J101
Available Surfaces
Pre-Consumer: 21.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
HONED Shown in J101
Available Surfaces
Pre-Consumer: 21.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
UNPOLISHED Shown in J101
Available Surfaces
Pre-Consumer: 21.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
TEXTURED Shown in J101
Available Surfaces
Pre-Consumer: 21.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
 

Description

Sleek, trendy colors and accents, multiple large format sizes, and a choice of durable surfaces make EC1 a top choice for style and selection. This ColorBody Porcelain offers designers and architects an array of stylish options and is suitable for many exterior applications. EC1 is an eco-friendly product being produced using a high percentage of recycled materials.

Notes:

  • All colors available in Polished, Unpolished, Honed & Textured surfaces.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.

  • Extended lead times apply. Please contact your SSC representative for more information.

Product Information

Tile Thickness:
7/16" (11 mm - Unpolished, Textured & Honed)
3/8" (10 mm - Polished)
Relative Pricing:
High
Minimum
Grout Joint
Recommendation:
1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%).
Shade Variation:
Medium (V2)

Technical Data

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Unpolished  > 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A
  Polished  < 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A
  Honed  < 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A
  Textured  > 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)
Walls/Backsplashes
Countertops
Pool Decking * * * * *
Pool Linings
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E E*

Notes:

  • Residential Exterior Floors suitable in Unpolished & Textured surfaces only.

    *Pool Decking suitable in Textured surface only.

    Textured Surface: Suitable for pool decks and patios in freezing and non-freezing climates when proper installation methods are followed.

    Unpolished, Polished, & Honed: Suitable for exterior walls in freezing & non-freezing climates when proper installation methods are followed.

Downloads/Links

Tile Size

Size     Shape
24 x 48 Field Tile
(24" x 48")
(60.0 cm x 120.0 cm)
Pieces Per Carton: 2
SQFT: 15.49
Polished, Unpolished, Textured, Honed
 
  24" x 48" Field Tile
24 x 24 Field Tile
(24" x 24")
(60.0 cm x 60.0 cm)
Pieces Per Carton: 4
SQFT: 15.49
Polished, Unpolished, Textured, Honed
 
  24" x 24" Field Tile
12 x 24 Field Tile
(12" x 24")
(30.0 cm x 60.0 cm)
Pieces Per Carton: 6
SQFT: 11.62
Polished, Unpolished, Textured, Honed
 
  12" x 24" Field Tile
4 x 24 Field Tile
(4" x 24")
(10.0 cm x 60.0 cm)
Pieces Per Carton: 16
SQFT: 10.33
Unpolished, Textured, Honed
 
  4" x 24" Field Tile
6 x 24 Random Linear Accent
(6" x 24")
(15.0 cm x 60.0 cm)
Pieces Per Carton: 6
 
  6" x 24" Random Linear Accent

Trim

Description   Shape Number Size Shape
Bullnose   S44F9 4 x 24 Bullnose S44F9 - 4" x 24"
Stair Tread   S-6CF6 12 x 24 Stair Tread S-6CF6 - 12" x 24"

Notes:

  • Trim available in Polished, Unpolished, Textured & Honed surfaces.

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.