Daltile

Lodge

ColorBody™ Porcelain

Tru-Edge Exterior Product Certified Porcelain

Unpolished

ALPIN P300
Unpolished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
OCEAN P301
Unpolished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PAPOOSE P302
Unpolished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PICO BONITO P303
Unpolished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
SABI SABI P304
Unpolished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China

Light Polished

ALPIN P300
Light Polished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
OCEAN P301
Light Polished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PAPOOSE P302
Light Polished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PICO BONITO P303
Light Polished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
SABI SABI P304
Light Polished
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China

Textured

ALPIN P300
Textured
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
OCEAN P301
Textured
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PAPOOSE P302
Textured
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PICO BONITO P303
Textured
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
SABI SABI P304
Textured
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China

Modern Liners

ALPIN P300
Modern Liners
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
OCEAN P301
Modern Liners
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PAPOOSE P302
Modern Liners
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
PICO BONITO P303
Modern Liners
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
SABI SABI P304
Modern Liners
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
 

Description

Lodge™ ColorBody™ Porcelain is the perfect fusion of rustic meets contemporary. With a refined stone visual and smooth Tru-Edge™ cut, Lodge offers a compelling visual at an affordable price. Available in five warm colors and coordinating modern liner accents, Lodge is sure to complement any project. The option of four field sizes available in three surface textures offers a wide range of application uses, including residential and commercial exteriors.

Notes:

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigment from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.

Product Information

Tile Thickness:
3/8"
Minimum
Grout Joint
Recommendation:
1/8"
Shade Variation:
Medium (V2)

Technical Data

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Textured  > 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A
  Unpolished  > 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A
  Light Polished  < 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered) * ^
Walls/Backsplashes
Countertops
Pool Decking ^ ^ ^ ^ ^
Pool Linings
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E* E^

Notes:

  • Not for use on ramps.

  • *Unpolished and Textured surfaces only.

  • ^Textured surface only.

  • Textured surface - Suitable for exterior floors (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.

  • Unpolished & Light Polished surface - Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

Downloads/Links

Tile Size

Size     Shape
24 x 24 Field TIle
(23 9/16" x 23 9/16")
(60.0 cm x 60.0 cm)
Pieces Per Carton: 3
SQFT: 11.62
 
  24" x 24" Field TIle
16 x 32 Field Tile
(15 3/4" x 31 1/2")
(40.0 cm x 80.0 cm)
Pieces Per Carton: 4
SQFT: 13.77
 
  16" x 32" Field Tile
12 x 24 Field Tile
(11 3/4" x 23 9/16")
(30.0 cm x 60.0 cm)
Pieces Per Carton: 6
SQFT: 11.62
 
  12" x 24" Field Tile
12 x 12 Field Tile
(11 3/4" x 11 3/4")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 11
SQFT: 10.65
 
  12" x 12" Field Tile
12 x 12 Modern Liner
(11 3/4" x 11 3/4")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 11
 
  12" x 12" Modern Liner

Trim

Description   Shape Number Size Shape
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
Cove Base Outcorner   SC-36C9T 1 x 6 Cove Base Outcorner SC-36C9T - 1" x 6"

Notes:

  • Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.