Daltile

Brixton™

Ceramic Floor & Wall

Pre-Consumer

Floor & Wall Field Tile

BONE BX01
Floor & Wall Field Tile
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
SAND BX02
Floor & Wall Field Tile
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
MUSHROOM BX03
Floor & Wall Field Tile
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX

Floor/Wall Decorative Accent

UNIVERSAL ACCENT
3 X 12 BX10

Floor/Wall Decorative Accent
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
 

Description

Notes:

  • Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Product Information

Tile Thickness:
5/16"
Relative Pricing:
Low - Medium
Minimum
Grout Joint
Recommendation:
3/16" Floor, 1/16" Wall
Shade Variation:
Medium (V2)

Technical Data

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    > 0.42 < 3.0%  =250 lbs. 8.0 Resistant 4

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Applications

Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior n/a  
Wet & Level - Interior ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Covered Exterior ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  

Notes:

  • 6" x 6" & 9" x 12" recommended for residential bathroom floors only--not subject to outside foot traffic.

  • Floor tile suitable for exterior floors (excluding pool decks) and walls in non-freezing climates only.

Downloads/Links

Tile Size

Size     Shape
3 x 12 Universal Decorative Accent
(3" x 11 3/4")
(7.6cm x 29.9cm)
Pieces Per Carton: 10
 
  3" x 12" Universal Decorative Accent
6 x 6 Wall Field Tile
(6" x 6")
(15.2cm x 15.2cm)
Pieces Per Carton: 50
SQFT: 12.5
 
  6" x 6" Wall Field Tile
9 x 12 Wall Field Tile
(8 15/16" x 11 15/16")
(22.7cm x 30.3cm)
Pieces Per Carton: 15
SQFT: 11.25
 
  9" x 12" Wall Field Tile
12 x 12 Floor Field Tile*
(11 13/16" x 11 13/16")
(30cm x 30cm)
Pieces Per Carton: 16
SQFT: 15.49
 
  12" x 12" Floor Field Tile*
18 x 18 Floor Field Tile*
(17 7/8" x 17 7/8")
(45.4cm x 45.4cm)
Pieces Per Carton: 5
SQFT: 10.9
 
  18" x 18" Floor Field Tile*

Notes:

  • *This product is manufactured regionally. Slight variances in size and shading may occur between regions. Please contact your sales representative to verify carton square footage. As with all tile projects, be sure to purchase sufficient quantities with your initial order.

Trim

Description   Shape Number Size Shape
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
Bullnose (6" side)   S-4269 2 x 6 Bullnose (6" side) S-4269 - 2" x 6"
Bullnose (9" side)   S-4309 3 x 9 Bullnose (9" side) S-4309 - 3" x 9"
Bullnose   S-4669 6 x 6 Bullnose S-4669 - 6" x 6"
Bullnose Corner   SN-4269 2 x 2 Bullnose Corner SN-4269 - 2" x 2"
Bullnose Corner   SN-4309 3 x 3 Bullnose Corner SN-4309 - 3" x 3"
Bullnose Corner   SCRL-4669 6 x 6 Bullnose Corner SCRL-4669 - 6" x 6"
Quarter Round Corner   UC-106 1 x 1 Quarter Round Corner UC-106 - 1" x 1"
Quarter Round   A-106 1 x 6 Quarter Round A-106 - 1" x 6"
Counter Rail   26CRWL 2 x 6 Counter Rail 26CRWL - 2" x 6"
Bullnose   A-4200 2 x 6 Bullnose A-4200 - 2" x 6"
Bullnose Corner   AN-4200 2 x 2 Bullnose Corner AN-4200 - 2" x 2"
Counter Corner   22CRCN 2 x 2 Counter Corner 22CRCN - 2" x 2"

Notes:

  • Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.