Mounting: Standard mounting method is on 1' x 2' dot-mounted sheets, which provides excellent bonding surface for faster installation.
Use of a latex modified thin-set is recommended for installation. Not for use on ramps.
*Available in Made-to-Order Only.
|< 0.42||<3.0%||>300 lbs.||6.0-7.5||Resistance||4 - Commercial|
Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.
- These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 184.108.40.206.10, available at www.tcnatile.com/section220.127.116.11.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Floors/Patios (Covered & Uncovered)||*|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
*Office building bathroom floors & hotel baths only. Not for use on shower stall floors.
Permatones series suitable only for residental bathroom floors not subject to outside foot traffic. Not for use on shower floors.
Suitable for exterior walls in non-freezing climates when proper installation methods are followed.
Office building restroom floors and hotel baths only. Not for use on shower stall floors. Check all building codes for COF compliance prior to installation.
|2 x 2 Nominal Field Tile||
(1 15/16" x 1 15/16")
(4.9 cm x 4.9 cm)
Pieces Per Carton: 12
|Bullnose||S-886||2 x 2|
Built up Base is not available in Group 2 colors.
Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.